CoolSculpting in Tucson is a revolutionary technology that uses a precisely controlled cooling method called Cryolipolysis which targets, cools and eliminates fat cells. After a CoolSculpting procedure the body continues to break down the treated fat cells, now in a crystallized or frozen state, leading to fat cell death. Over the next two to four months they are naturally flushed from the body.
Cool Sculpting procedure here in Tucson is designed to target and destroy 20%-25% of the fat cells in the treated area. Diet, exercise and other procedures may shrink fat cells, leaving an open opportunity to increase the size of those same fat cells from a lifestyle shift. Fat cells freeze at here in Tucson higher temperatures than surrounding tissues. Cool Sculpting technology safely delivers precisely controlled cooling to gently and effectively target the fat cells underneath the skin. Over the course of the following weeks after your treatment, your body processes the fat and eliminates it from the body naturally. While dieting and exercise makes the fat cells smaller, this fat freezing procedure gets rid of them completely, allowing you to enjoy positive and long-lasting results of CoolSculpting!
Am I a Good Candidate for CoolSculpting Tucson?
In the past, if diet and exercise couldn't get rid of stubborn fat bulges, many patients opted for liposuction, an invasive surgical procedure. Or, they turned to radio frequency devices or infrared technology, but these devices provided limited improvement. With advancements in technology, patients can now reduce unwanted fat bulges and enjoy permanent reduction in fat cells during a non-invasive, non-surgical method called CoolSculpting that provides dramatic results.
Developed by Zeltiq CoolSculpting can reduce areas that are difficult to reach with diet and exercise: love handles, lower belly fat rolls, upper belly fat, muffin top, under bra fat and back fat. It's an incredibly effective technique that improves the contour of the body.
How is this possible?
How is this possible?
The FDA-cleared CoolSculpting works through a revolutionary technology called cryolipolysis. During cryolipolysis, literally meaning "cold induced fat destruction," fat cells are cooled to a temperature that causes them to be eliminated. The procedure is very safe: the temperature required to destroy fat cells is higher than what would cause damage to skin, muscle and nerves. With CoolSculpting, there is no damage to the surrounding structures. During the procedure, the physician applies a skin protecting gel pad to the skin, and a CoolSculpting applicator is positioned over the desired treatment area. The device draws the fat bulge in, and cools down the fat to induce cryolipolysis, continuously monitoring the temperature and adjusting it as needed.
Unlike liposuction, in which the fat cells are suctioned out of the body, the CoolSculpting treatment causes the body to naturally eliminate the fat cells through the lymphatic drainage system. The cells are then slowly excreted by the body over a period of the next several months. With CoolSculpting, treatment of each fat bulge typically takes one hour to perform. Love handles may take two to four hours of treatment; the lower abdomen usually takes about one hour using a special larger applicator. However, each case is different the patient/physician should discuss this prior to the procedure.
As opposed to liposuction, no anesthesia is necessary for CoolSculpting. During the procedure, patients can even use their telephone or laptop, read a book or watch a movie. The only discomfort patients may feel while undergoing Cool Sculpting is a sensation of someone pinching or squeezing the fat when the device is first applied to the skin. This usually goes away in the first five minutes of the procedure.
CoolSculpting can be performed in the comfort of a physician's office. Patients go home immediately after the procedure and can resume regular activities; many have been known to work out or do yoga the same day. There may be some mild discomfort in the area of treatment; numbness is usually present afterward and can take several weeks to resolve. Extra Strength Tylenol® can be taken but it's advised to avoid taking anti-inflammatory agents for the first two months after the procedure.
Many patients start noticing results as soon as three weeks after the cool body sculpting procedure. The majority of the results will be seen at about two months after Cool Sculpting is performed; improvement may continue after three months. In most cases, the skin is elastic enough to contract after the treatment. However, it's important to know that if loose skin is the cause of the bulge, then Cool Sculpting alone will not treat the condition - a surgical procedure such as a tummy tuck may be needed.
Many patients ask if there is a need to start a new diet or exercise program after CoolSculpting. There is not. It's recommended that patients maintain the same program they did prior to the procedure to maintain their weight. Most patients need only one Cool Sculpting treatment; however, repeat treatments can be performed after three months if additional reduction of the fat bulges is desired. Coolsculpting Before and After Photos show that the results of coolsculpting are impressive and undeniable. While most people are candidates for CoolSculpting, it's important to consult with a highly qualified physician.
Explaining the Coolsculpting Procedure
What is Coolsculpting?
Men and women are having body slimming results without going under the knife or taking supplements. Target those fatty areas on your midsection, arms, legs and back. There is a procedure that only requires a small amount of time and an appointment at your local med spa. It is simple and relatively quick. Coolsculpting is a noninvasive, non-surgical procedure that uses cooling plates, applied to specific areas on the body, to essentially freeze unwanted fat cells.
How does Coolsculpting work and is it safe?
The overwhelming safety of this procedure is the most compelling feature and here is the detailed Coolsculpting guide which helps you to understand the complete process. Coolsculpting has been featured in magazines, television programs, and broadcasting. Coolsculpting uses a thermoelectric cooling device that is applied to problem areas to eliminate excess fat. Studies have shown that fat cells are effectively damaged by controlled cooling. The frozen fat cells will then dissolve and the body will digest them. In the following weeks after the procedure, your body will naturally eliminate these damaged fat cells.
A doctor or certified technician will perform the procedure in their facility. The client is asked to sit in a reclining position while the device is placed on the area where fats need treatment. The treatment is done while the patient is awake. There very little discomfort associated with thermoelectric cooling. Naturally, the technician will ask that the patient sit still and get comfortable to sit for one or more hours depending on how many treatment areas there are. Patients can read a book, watch a movie, or play on their phone or tablet during treatment.
The device has two plates and a vacuum suction. The vacuum sucks up flaps of skin trapping fat cells between the plates. Applied precision cooling destroys the fat cells targeted. There is a massage feature on some Coolsculpting machines. If the technician recommends it, the patient will feel the massages sensation as well. The massaging function is used to help alleviate discomfort, and massage the cells so they can be better treated. In the time following the Coolsculpting, these targeted cells will die off and the body will naturally rid itself of them.
This is the only FDA approved treatment of its kind. Most clients do not feel discomfort, only minor pulling sensation and tingling. What makes this treatment so unique is that the device only affects the fat cells. Surrounding skin tissue, muscle, and fat is completely unaffected. This can be a concern for fit people who may be afraid of the muscle tissue being shrunk or affected. Clients can expect long lasting results, and many are satisfied after only one treatment. Each area requires a 1-hour session of Coolsculpting.
When will Coolsculpting results be seen?
Naturally, clients and technicians alike love seeing the results! Although the Coolsculpting treatment is relatively quick, the results will be slow to start. Many clients reported seeing a visible shrinking of the treated area within 1–2 months. Others continue to see improvement up to 6 months after the first treatment. Subsequent treatments can be performed for further definition of a problem area. Although, it should be noted that one session is sometimes all it takes to achieve the desired results. It is helpful to take a before picture ahead of the first Coolsculpting treatment. Wear something that shows the area to be treated clearly and wholly. Most facilities will take the picture for you and for their files.
Each corresponding session or follow up appointment with the technician, additional picture should be taken. This way there is photo documentation of the results and improves tone, tightening, and flattening of the treated areas.
Are there any side effects of Coolsculpting that patients should be aware of?
Knowing what to expect after the first Coolsculpting session is essential. The doctor or technician will go over all the side effects in the initial consultation. The Food and Drug Association approved Coolsculpting in 2012. In their reporting, no adverse side effects were found. Patients have reports stinging, tingling, or cramping at the treated area. Bruising can sometimes be expected as well, because folds of skin are being essentially pinched between the Coolsculpting suction plates. Bruising and sore areas will subside in days or weeks after the last performed procedure. It is reported that clients with small and targeted areas see the best results. Larger areas are not to be treated, as this can lead to uneven appearance. The best candidates for Coolsculpting are those men and women who have problem areas on the body. In most cases, the fat cells will be eliminated permanently.
What is the Coolsculpting treatment cost?
Costs will vary per treatment per area. Depending on where you are receiving treatment, and weather a certified technician or a doctor is performing it, a single Coolsculpting session starts at $500 and goes up from there. If the technician believes more than one treatment will be needed, the client will be informed at the time of the initial consultation.
What is the suggested wait time between Coolsculpting sessions?
After a successful session of Coolsculpting, many patients want to know when they can get another session, or start on another problem area. Most facilities offering Coolsculpting suggest waiting 4–8 weeks between sessions. For specific more difficult areas, and optimal results, the technician may recommend a series of sessions. Following the trained professional’s advice and recommendations will lead to the best results for the patient.
Where is Coolsculpting being offered?
The popularity of Coolsculpting is evident in the fact that so many health centers, med spas, and doctor offices have it available. With successful results and comfortable treatment experiences, this sought after treatment is being widely used to help people look and feel their best. The treatment will only be done by a trained professional, who has experience with the device and its functions.