CoolSculpting in Fountain Hills is a revolutionary technology that uses a precisely controlled cooling method called Cryolipolysis which targets, cools and eliminates fat cells. After a CoolSculpting procedure the body continues to break down the treated fat cells, now in a crystallized or frozen state, leading to fat cell death. Over the next two to four months they are naturally flushed from the body.
Cool Sculpting procedure is designed to target and destroy 20%-25% of the fat cells in the treated area. Diet, exercise and other procedures may shrink fat cells, leaving an open opportunity to increase the size of those same fat cells from a lifestyle shift. Fat cells freeze at higher temperatures than surrounding tissues. Cool Sculpting technology safely delivers precisely controlled cooling to gently and effectively target the fat cells underneath the skin. Over the course of the following weeks after your treatment, your body processes the fat and eliminates it from the body naturally. While dieting and exercise makes the fat cells smaller, this fat freezing procedure gets rid of them completely, allowing you to enjoy positive and long-lasting results of CoolSculpting!
Am I a Good Candidate for CoolSculpting in Fountain Hills?
What is Coolsculpting?
Men and women are having body slimming results without going under the knife or taking supplements. Target those fatty areas on your midsection, arms, legs and back. There is a procedure that only requires a small amount of time and an appointment at your local med spa. It is simple and relatively quick. Coolsculpting is a noninvasive, non-surgical procedure that uses cooling plates, applied to specific areas on the body, to essentially freeze unwanted fat cells.
How does Coolsculpting work and is it safe?
The overwhelming safety of this procedure is the most compelling feature and here is the detailed Coolsculpting guide which helps you to understand the complete process. Coolsculpting has been featured in magazines, television programs, and broadcasting. Coolsculpting uses a thermoelectric cooling device that is applied to problem areas to eliminate excess fat. Studies have shown that fat cells are effectively damaged by controlled cooling. The frozen fat cells will then dissolve and the body will digest them. In the following weeks after the procedure, your body will naturally eliminate these damaged fat cells.
A doctor or certified technician will perform the procedure in their facility. The client is asked to sit in a reclining position while the device is placed on the area where fats need treatment. The treatment is done while the patient is awake. There very little discomfort associated with thermoelectric cooling. Naturally, the technician will ask that the patient sit still and get comfortable to sit for one or more hours depending on how many treatment areas there are. Patients can read a book, watch a movie, or play on their phone or tablet during treatment.
The device has two plates and a vacuum suction. The vacuum sucks up flaps of skin trapping fat cells between the plates. Applied precision cooling destroys the fat cells targeted. There is a massage feature on some Coolsculpting machines. If the technician recommends it, the patient will feel the massages sensation as well. The massaging function is used to help alleviate discomfort, and massage the cells so they can be better treated. In the time following the Coolsculpting, these targeted cells will die off and the body will naturally rid itself of them.
This is the only FDA approved treatment of its kind. Most clients do not feel discomfort, only minor pulling sensation and tingling. What makes this treatment so unique is that the device only affects the fat cells. Surrounding skin tissue, muscle, and fat is completely unaffected. This can be a concern for fit people who may be afraid of the muscle tissue being shrunk or affected. Clients can expect long lasting results, and many are satisfied after only one treatment. Each area requires a 1-hour session of Coolsculpting.
When will Coolsculpting results be seen?
Naturally, clients and technicians alike love seeing the results! Although the Coolsculpting treatment is relatively quick, the results will be slow to start. Many clients reported seeing a visible shrinking of the treated area within 1–2 months. Others continue to see improvement up to 6 months after the first treatment. Subsequent treatments can be performed for further definition of a problem area. Although, it should be noted that one session is sometimes all it takes to achieve the desired results. It is helpful to take a before picture ahead of the first Coolsculpting treatment. Wear something that shows the area to be treated clearly and wholly. Most facilities will take the picture for you and for their files.
Each corresponding session or follow up appointment with the technician, additional picture should be taken. This way there is photo documentation of the results and improves tone, tightening, and flattening of the treated areas.
Are there any side effects of Coolsculpting that patients should be aware of?
Knowing what to expect after the first Coolsculpting session is essential. The doctor or technician will go over all the side effects in the initial consultation. The Food and Drug Association approved Coolsculpting in 2012. In their reporting, no adverse side effects were found. Patients have reports stinging, tingling, or cramping at the treated area. Bruising can sometimes be expected as well, because folds of skin are being essentially pinched between the Coolsculpting suction plates. Bruising and sore areas will subside in days or weeks after the last performed procedure. It is reported that clients with small and targeted areas see the best results. Larger areas are not to be treated, as this can lead to uneven appearance. The best candidates for Coolsculpting are those men and women who have problem areas on the body. In most cases, the fat cells will be eliminated permanently.
What is the Coolsculpting treatment cost?
Costs will vary per treatment per area. Depending on where you are receiving treatment, and weather a certified technician or a doctor is performing it, a single Coolsculpting session starts at $500 and goes up from there. If the technician believes more than one treatment will be needed, the client will be informed at the time of the initial consultation.
What is the suggested wait time between Coolsculpting sessions?
After a successful session of Coolsculpting, many patients want to know when they can get another session, or start on another problem area. Most facilities offering Coolsculpting suggest waiting 4–8 weeks between sessions. For specific more difficult areas, and optimal results, the technician may recommend a series of sessions. Following the trained professional’s advice and recommendations will lead to the best results for the patient.
Where is Coolsculpting being offered?
The popularity of Coolsculpting is evident in the fact that so many health centers, med spas, and doctor offices have it available. With successful results and comfortable treatment experiences, this sought after treatment is being widely used to help people look and feel their best. The treatment will only be done by a trained professional, who has experience with the device and its functions.
Non-invasive Fat Reduction Options
Getting rid of unwanted fat has never been easier, and today, it can be done through non-invasive techniques. There have been many comparisons between the different options, especially between SculpSure vs CoolSculpting. Both SculpSure and CoolSculpting are FDA-approved non-invasive fat reduction techniques and have seen success as an alternative to lipo. So which non-invasive procedure is better?
Time in the Market
CoolSculpting has been available in the commercial market since 2010 and has established itself as a proven alternative to invasive lipo. On the contrast, SculpSure has only been on the market for less than 6 months. With CoolSculpting, doctors understand all of the possible outcomes and long-term effects. SculpSure just hasn’t been out long enough to know the long-term effects of lasers to your fat! When looking at these facts, it’s easy to say that CoolSculpting wins on this front.
There is no arguing the efficacy of CoolSculpting, as it has been in use for nearly a decade and has countless customer testimonials, whereas SculpSure is too new for us to make a determination as to its efficacy. At this point, it should still be considered experimental and your results could be much different than you expect. -Luxe Laser Centervia Luxe Laser Center
CoolSculpting uses the process of freezing and killing your fat cells. After the procedure is done, those fat cells die and are flushed out of the system, never to return. SculpSure uses a direct laser that heats the fat cells in a concentrated area and causes them to release into the body, dissipating fat in that treated area. Both CoolSculpting and SculpSure have had success, however, CoolSculpting has been scientifically supported through dozens of FDA research articles, while SculpSure still has many concerns about its procedure, specifically related to efficacy being lost when the heat is turned down due to pain during the procedure. Many organizations consider SculpSure as “Experimental” (including a Cynosure Training facility!) and strongly believe that freezing fat is more effective and safer long term. If a Cynosure training facility isn’t comfortable offering SculpSure, that says something!
via Luxe Laser Center
In most states, anyone holding a medical Ph.D is cleared to operate non-surgical procedures, including CoolSculpting and SculpSure, but is this enough? So many doctors are “qualified” to operate CoolSculpting and SculpSure equipment with little to no training! However, CoolSculpting requires a certification program that trains and educates any CoolSculpting operators to ensure maximum results and minimize the chance of injury. To this date, there is no documentation nor any proof that SculpSure has any such training programs. Because of the lack of evidence of training from SculpSure, CoolSculpting wins the training section.
CoolSculpting Certification Mark
Both CoolSculpting and SculpSure are considerably less time than invasive lipo procedure, which makes non-invasive procedures extremely desirable for those that want to lose stubborn fat! That being said, SculpSure does have a slight advantage over CoolSculpting in the length of the procedure. SculpSure has an average of 30 minute procedure compared to 45–60 minute for CoolSculpting. Both procedures have no downtime, which is a million times better than the average 1 week downtime after traditional liposuction. Time wise, SculpSure wins this round.
CoolSculpting received their first FDA approval in 2010 and is currently FDA approved for the abdomen, flanks, thighs, and chin. SculpSure received their first FDA approval in late 2015 and is only approved for abdomen and flanks. Don’t be fooled when doctors offer treatment for arms, back, calves, etc — these areas are NOT FDA approved! Both CoolSculpting and SculpSure CAN treat most areas, but only the above areas are FDA approved. CoolSculpting is currently the only non-invasive fat reduction procedure that is FDA approved for the chin area. Having been cleared to for more treatment areas and for longer, CoolSculpting is the winner of this round.
Track Record & Reviews
Currently on top review sites such as RealSelf, SculpSure has only 23 reviews on RealSelf compared to CoolSculpting’s almost 800 reviews. The main issue with sites like RealSelf is that anyone can post a review, but I don’t want to get on a soapbox… I’ll save that issue for another blog. RealPatientRatings is a great website for reviews since the request for a review comes straight from the doctor, ensuring all reviews are real. Coolsculpting has almost 400 reviews on realpatientratings.com, while SculpSure has no reviews. While the verdict is still out on SculpSure, CoolSculpting has a proven track record and has consistently shown results.
And the Winner Is…
CoolSculpting has been showing consistent results with no long term side effects for years, while even Cynosure’s training facilities won’t offer their own product, SculpSure, since it’s experimental. In Sculpsure vs CoolSculpting, CoolSculpting comes out on top 5 to 1.
Coolsculpting Treatment Arizona